Features:

• Made from a specially formulated thermoplastic polyurethane (TPU) material.
• Flexible print outs.
• Requires direct drive style extruders. Bowden style extruders do not work well.
• Heated bed is recommended but not required.
• Glue and/ or blue painters tape is suggested if not using a heated bed.
• Printing speed should be lower than what you use for regular PLA.
• Recommended Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min); Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
• Color: Yellow
• Diameter: 1.75mm (±0.02mm)
• Length: Approx. 400m
• Weight: 1kg/2.2lb
• Extruder Temperature: 225°C - 235°C