You have no items in your shopping cart.
Details
Features:
- One-click Hover, Self-hover.
- 4 Flight Modes: Normal, Auto-balance, Auto-hover, Gyro Off.
- Standard wing type, Delta-wing and V-tail.
- Remote Master Gain.
- Servo Frequencies: 50Hz/125Hz/250Hz;
- Separated gain adjustment for each flight mode.
- Automatic stick centering.
- HV (8.4V) operating voltage supported.
- Futaba S.Bus / S.Bus 2 supported.
- Easy to use, extremely well-suited to beginners.
Flight Mode
Flight Mode | Colors of LED | Description | |
1 | Normal | Blue | Gyro rate mode |
2 | Auto-balance | Red | Self-balance Mode |
3 | Auto-hover | Blue & Red | Self-hover Mode |
4 | Gyro Off | Off | Gyro deactivated mode |
A3 allows you to choose 4 kinds of mode definitions for the 3-way switch, the factory default is Mode-1 (Normal-Balance-Hover). You can change it through function 7 in the setting menu, as shown below.
Modes | Position-1 | Position-2 | Position-3 | |
1 | Mode-1 * | Normal | Auto-balance | Auto-hover |
2 | Mode-2 | Normal | Gyro Off | Auto-balance |
3 | Mode-3 | Normal | Gyro Off | Auto-hover |
4 | Mode-4 | Auto-balance | Gyro Off | Auto-hover |
Normal Mode
Normal mode is the most basic application of the gyro. In this mode, the gyro will sense angular velocity on each axis and make a momentary reaction. The normal mode is suitable for all types of fixed-wings, it can effectively improve the stability of your plane specially on a windy day.
Auto-balance Mode
The auto-balance mode is designed for the new beginners or the FPV applications. When operating in this mode, the controller will command the plane to maintain level flight automatically when you release the sticks. When switch it to this mode from any other modes in an emergency, the plane will recover to the level flight automatically, which we call "one-click rescue".
Auto-hover Mode
The auto-hover mode is another form of the self balance ability of the controller. The only difference is that the correction from the gyro will be applied to both pitch and yaw axes, to keep the plane always vertical. When switch to this mode, the plane will lift its nose and start to hover automatically, which we call "one-click hover".
Gyro Off Mode
Choose this mode to disable the gyros for all channels. The plane will be completely under the control of the radio. The plane will go back to its previous performance when operating it in this mode. Usually it is only used to test.
One-click Hover and Auto-hover
After switching to auto-hover flight mode, you only need to control the throttle to maintain enough pulling force for the plane. This mode can be used to reduce the difficulty of hover practice.
One-click Rescue and Auto-balance
Additional Information
SKU | HEA-AC-5086 |
---|
Customer Reviews
- Great Product Review by Old Hoosier
-
Quality Value Overall
Install is super easy once you understand what's going on. Download instructions and follow them. There are instructions on You Tube. I used my DX-9. A 6 channel radio works fine. Using Aux 1 and a three way switch (I used the flap switch) allows turning the gyro on or off. This gives an escape route if things go wrong.
I set normal gain at 50%. I have about 10 flights on that gain setting and all looks good. It is rock solid. Everything is smooth and stable completely ignoring the 10 - 15 mph wind. Please note the airplane can and will crash if improperly flown. This unit is not a safety net. It just makes things easier
I recommend the A3 and the A3-L to anyone with above beginner skills. Things are much smoother from take-off to landing and every thing in between. (Posted on 10/10/2017)
Manuals