You have no items in your shopping cart.
Subtotal: $0.00
Details
- Quickie thin CA is for normal gluing and gap-filling when building/assembling model airplanes.
- Usually cures in 5-10 seconds.
- Full 1oz bottle.
This CA cannot be used on EPS type foam.
Additional Information
| SKU | VHB-AC-2097 |
|---|
Customer Reviews
- Great stuff Review by Vince
-
This glue works very well on everything. Well, don't use it on foam. I put the entire airplane together with this. It does start to thicken and gel on you if you don't keep it in the frig. Once you open it, plan on using it fairly quickly. All in all, it's a great glue. (Posted on 5/20/2015)Value Overall Quality - Excellent glue Review by Vince
-
This glue is great. It works just like the best CA's out there. I have been assembling models for 34 years now, and this glue is excellent quality. I highly recommend it.Overall Quality Value
Parts must be in contact already, this glue wicks into your parts well.
If you are doing balsa end to end, cure time is about 2 seconds.
If you are laminating or linear grain gluing, the cure time is 5-6 seconds.
CA hinges cure in about 5-6 seconds and the control surfaces are very well adhered.
I roughened aluminum with 320 grid and glued two pieces of aluminum. The glue joint was extremely strong.
I roughened plastic with 320 grid and glued it together with this glue, and the joint is also extremely strong.
I secure carbon fiber to airframes with this glue, and it works well there too. You must glue the rougher surface for carbon fiber.
I highly recommend this product. (Posted on 12/31/2014) - good stuff Review by stanley
-
Stuff works real well, Zap glue tips fit nice and tight on the nozzle and dont leave a big mess. (Posted on 1/13/2013)Quality Value Overall
