Description:

• Balance-charge up to 6-cell LiPO.
• Up to 50W of output.
• AC power supply sold separately.
• This is NOT the B6 made by SkyRC.

Specifications:

• Input Voltage: DC 11.0~18.0 V
• Max Charging Power: 50W
• Max Discharging Power: 5W
• Charging Current Range: 0.1~5.0A
• Discharging Current Range: 0.1~1.0A
• Current Drain for Balancing LiPO: 300mA/Cell
• Support Battery Type and Number of Cells: Li-ion/Polymer 1-6S; NiCd/NiMH 1-15 cells; Pb (lead-acid)battery 2V~20V
• Weight: 277g
• Dimensions: 13.3 x 8.7 x 3.3cm/5.2 x 3.4 x 1.3in(L*W*H)

Features:

• DC port for 11~18V DC power supply.
• Support a wide variety of Lithium battery including LiPO, LiFe, Li-ion
• Support normal charge, balance charge, fast charge, storage charge, discharge, cycling.
• Short-circuit, reverse polarity protection.
• Can set up input voltage cutoff to protect from discharging the DC power source.
• Capacity cutoff, voltage cutoff and "safety timer" cutoff protecting from overcharging.
• Individual cell overdischarge protection.
• Can set up battery temperature cutoff. (temperature sensor required)
• In cycling, "time delay" between two cyles can be set up.
• Can set up Delta peak voltage for NiMH/NiCd battery only.
• Can set up the max charging current for NiMH/Nicd in "Auto" Mode.
• 5 user programmable memories for each type of battery.

Accessories Included:

• DC input power lead with two alligator clips.
• Charge lead with T male connector.
• T female connector to alligator clips adaptor.
• T female connector to JST connector adaptor
• T female connector to JR connector adaptor
• T female to cigarette lighter connector adaptor