The E400 (28-30) brushless out-runner motor is equivalent in size to E-Flite Park 400 / AXI 2212. It is capable of producing up to 2 lb of thrust and generate about 220W of power.Bullet connectors are NOT soldered. You will need to install your own connector.

Specifications:

• KV: 2200.
• Weight: 1.9oz (54g) for motor only, not including mounting accessories.
• Motor Diameter: Approx. 28mm
• Connector: 3.5mm bullet connector
• Shaft Diameter: 3.175 mm
• Max Load: Approx. 20A

Recommended Setup:

• 30A  brushless motor ESC
• 2-3S LiPO.
• Prop Selection: Remember to always use props designed for electric motors, nitro props are heavier and might overload the motor.
  With 2S LiPO: 7 x 6
  With 3S LiPO: 6 x 4

Motor Dimensions:

Included Accessories:

This motor includes prop adapter and radial mount shown below. 3.5mm bullet connectors need to purchase separately(SKU: AMS-AC-1476).

Mounting Options:

The included accessories allow you to mount the motor in front of the firewall. Shown below is the motor with radial mount installed on the back and prop adapter installed on the front, ready to be installed in front of the firewall.

If you would like to mount it behind the firewall, you will need to purchase the 3.175mm Collet Adapter.