The SKU of the replacement motor shaft: SAT-AC-2611

This 400-size 2200kv brushless outrunner motor provides quiet, efficient power from a small and light-weight package. It can produce over 1lb of thrust, or 220W of power.

Specifications:

• KV: 2200
• Motor Diameter : 28mm
• Weight: 2.0oz (56g)
• Shaft Diameter: 3.17mm
• Connector: 3.5mm bullet connector
• Battery: 3S LiPO
• Max Load: 20A
• Max Power: 220W

Recommended Setup:

• 30A brushless ESC 
• 2S-3S LiPo
• Prop Selection: Remember to always use props designed for electric motors, nitro props are heavier and might overload the motor.
• With 3S LiPO: 6 x 3
• With 2S LiPO: 7 x 3.5

E400 Motor Dimensions: (in millimeter)

Included Accessories:

This motor includes prop adapter and radial mount shown below. The motor has bullet connectors pre-installed, and includes female bullet connectors for use with your ESC.

E400 Motor Mounting Options:

The included accessories allow you to mount the motor in front of the firewall. The radial mount is installed on the back and the prop adapter is installed on the front.

If you would like to mount it behind the firewall, you will need to purchase the 3.17mm Collet Adapter.