This J3 Piper Cub is another member of our Giant plane line. it features the durable construction and superb fight performance. this giant J3 cub is mainly constructed of the balsa wood and plywood. the firewall. the landing gear mount and tail part are all reinforced in case of the bad landing. Wings are attached to the fuselage through two wing joiners and two screws and can be removed in 1-2 minutes, easy for storage and transportation. the assembly also is quite easy.

Our giant J3 Piper Cub can be powered by both electric motor and gas/glow engine. (electric motor mount and 550cc fuel tank are included.)

This is a ARF airplane, and it does not any electronics.

Specifications:

• Wingspan: 91 in (2306mm)
• Length: 59in (1503mm)
• Wing Area: 1185sq in (76.4sq dm)
• Flying Weight: Approx. 12lbs (5300g)

Recommended Setup(electric)(Not included):

• Motor: 5065 350kv brushless outrunner motor
• Speed Controller: 100A brushless ESC
• Servo: standard servo x 5
• Battery: 5000mah 8S LiPO (or two 4S LiPO in parallel)
• Prop: 18*10
• at least 4CH radio system (transmitter + receiver)

Recommended Setup(nitro and gasoline)(Not included):

• .90-.108 2 stroke nitro engine
• .110-.120 4 stoke nitro engine
• 20-24cc gasoline engine
• 2200mah 2s 6.6V LiFe battery for servos and receiver
• 5 x standard servo
• 18in prop
• at least 4CH radio system (transmitter + receiver)