Details
This B6 is made by Imax-RC not SkyRC, so does not have SkyRC product seal.
Specifications:
- Input Voltage: DC 11.0~18.0 V
- Max Charging Power: 50W
- Max Discharging Power: 5W
- Charging Current Range: 0.1~5.0A
- Discharging Current Range: 0.1~1.0A
- Current Drain for Balancing LiPO: 300mA/Cell
- Support Battery Type and Number of Cells: Li-ion/Polymer 1-6S; NiCd/NiMH 1-15 cells; Pb (lead-acid)battery 2V~20V
- Weight: 277g
- Dimensions: 133 x 87 x 33 mm
Features:
- DC port for 11~18V DC power supply.
- Support a wide variety of Lithium battery including LiPO, LiFe, Li-ion
- Support normal charge, balance charge, fast charge, storage charge, discharge, cycling.
- Short-circuit, reverse polarity protection.
- Can set up input voltage cutoff to protect from discharging the DC power source.
- Capacity cutoff, voltage cutoff and "safety timer" cutoff protecting from overcharging.
- Individual cell overdischarge protection.
- Can set up battery temperature cutoff. (temperature sensor required)
- In cycling, "time delay" between two cyles can be set up.
- Can set up Delta peak voltage for NiMH/NiCd battery only.
- Can set up the max charging current for NiMH/Nicd in "Auto" Mode.
- 5 user programmable memories for each type of battery.
Accessories Included:
- DC input power lead with two alligator clips.
- Charge lead with T male connector.
- T female connector to alligator clips adaptor.
- T female connector to JST connector adaptor
- T female connector to JR connector adaptor
- T female to cigarette lighter connector adaptor
You may also need Parallel Charging Board and 50W 12V Power supply