You have no items in your shopping cart.
Subtotal: $0.00
Details
1 Specification
1.1 Output: Continuous 30A, Burst 40A up to 10 Secs.
1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
1.3 BEC: 2A / 5V (Linear mode).
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
1.5 Size: 45mm (L) * 24mm (W) * 11mm (H).
1.6 Weight: 25g.
2 Features
2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
- Brake Setting: brake enabled / brake disabled.
- Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
- Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
- Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
- Start Mode: normal / soft / very soft.
- Timing: low / medium / high.
- Reset: reset all the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.
Can be programmed using a Hobbywing programming card.
Additional Information
| SKU | MSY-SC-3424 |
|---|---|
| Output | No |
| Input Voltage | 2-4S LiPO |
| Usage | Airplane/Heli/Multicopter |
| BEC | Built-in Linear BEC |
| ESC Series | No |
Customer Reviews
- Great ESC Review by Jarrod
-
Great ESC, work as described. Be sure to order motor connectors when purchasing these guys. None come with it (Posted on 9/18/2015)Value Overall Quality - So Far So Good Review by Kenneth
-
You have to set throttle range as stated in other review. Once you have done that works perfect. So far so good, can't beat the price for a 30amp esc. (Posted on 10/28/2014)Quality Value Overall - If yours wont arm...read this! Review by Cheryl
-
Note: You MUST set the throttle range before this esc will arm.Quality Value Overall
*Turn on TX
*Move throttle to top'
* Wait for double beep
* Immediately move throttle all the way down and get confirming beep
Now your esc will arm. If you dont do this procedure the esc will just beep, beep, beep. (Posted on 10/7/2014)
