GForce G32 Brushless Outrunner Motor (4250 - 800KV)

Product Rating:

Product Review (submitted on September 13, 2018):

I now own 5 of these motors and they are awesome! I purchased the first two of them in the winter months for two planes I was putting together. A 40 size Das Ugly Stick and a 40 size CAP 232, both extremely similar in weight. As the months went by and winter ended I mounted one in my stick and very early on the motor kept separating and coming apart, the inner shaft and housing would separate from the outer casing during flight. The 'C' clip would walk itself off during use. I called Value Hobby on this and they told me that since I purchased the motor a few months back they could not do anything, not even an even swap. I guess they don't support or stand behind Xmas shopping, or shopping early, or buying extra!!! I thought that was very poor service because I am a valued customer. As I mentioned I went on to purchase at least 5 of these G32 motors plus many others many including G46 and 4s and 6s batteries along with so many 80 Amp ESC's, REC, connectors, and many other RC supplies. And they couldn't bend on one $30 dollar motor! That's also why I shop at MotionRC as well because they displayed top notch are a no hassle SERVICE and PRICING. Value Hobby has great prices but this motor left me speechless.

Anyhow, this motor, even though the first one was a dud, this motor is awesome! I run this motor with my stick 40 59" WS and my 40 size CAP 57" WS. I run the same setup in both. The G32 with a 14x7 prop, 80 AMP Hobbywing ESC and GForce 4s 30C 4000 battery. Both of these planes have plenty of power, unlimited vertical and they can take off inside 3 feet. Depending on throttle management I get between 6 and 8 minutes flying time. Both planes weigh about the same with these setups. The STICK weighs 4.3 lbs with only servos, and 5.8 lbs with this setup. The CAP 232 weighs 4.45 with only servos and about 5.9 with this setup. At roughly 700 WATTS for the G32 these models are averaging about 120 WATTS per POUND.

Very economical and very powerful. I would recommend this motor for sure but I would give a warning about dealing with Value Hobbies customer service!