1 Specification

• Output: Continuous 20A, Burst 25A up to 10 Secs.
• Input Voltage: 2-3S LiPO
• BEC: Linear mode BEC 2A
• Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
• Size: 42mm (L) * 25mm (W) * 8mm (H).
• Weight: 28g.
• Compatible with Hobbywing Flyfun/Skywalker programming card.
• 3.5m bullet connectors and XT60 Connector pre-soldered.

2 Features
2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:

• Brake Setting: brake enabled / brake disabled.
• Battery Type: Li-xx (Li-ion or LiPo) / Ni-xx (NiMH or NiCd).
• Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
• Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
• Start Mode: normal / soft / very soft.
• Timing: low / medium / high.
• Lipo Battery Cells: Auto calculate / Set the cells number manually.
• Reset: Reset all the programmable items to its default setting.

2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Manuals

Instruction Manual Download