You have no items in your shopping cart.

Subtotal: $0.00

GForce 30A Brushless Multi-Rotor ESC with SimonK Firmware (2-4S LiPOs)

More Views

GForce 30A Brushless Multi-Rotor ESC with SimonK Firmware (2-4S LiPOs)

SKU: VHB-SC-3328

Availability: In stock

$6.00

Details

GForce 30A brushless ESCs with SimonK firmware are designed for use in multicopters and come pre-loaded with open source SimonK firmware. SimonK firmware uses up to 499Hz refresh rates and provides nearly instantaneous response. ESC parameters are preconfigured for multicopter use, no programming required.

Specificatios:

  • Input voltage: 2-4S LiPO (Can't use BEC function on 4s LiPO)
  • Continues current : 30A
  • Brust current: 40A(10s)
  • BEC: 5V/3A
  • Dimensions: 35 x 23 x 8mm (1.38 x 0.91 x 0.31in)
  • Weight: 23g
  • Discharge wire: T connector
  • Motor wire: 3.5mm bullet connector
  • Signal frequency: 30-499Hz

Additional Information

SKU VHB-SC-3328
Output 30A
Input Voltage 2-4S LiPO
Usage Airplane/Heli/Multicopter
BEC Built-in Linear BEC
ESC Series Simonk Series

Customer Reviews

Great ESC for Multi-rotors. Go for it! Review by DANNY
Overall
Quality
Value
I have purchased several of these ESCs. Super cheap and already have the connectors installed which is a plus! No issues with 1000kv and 1250kv motors and CC3D or KK board flight controllers.

No issues on 2 or 3 cell lipos.

Go for it! (Posted on 12/21/2016)
Excellent esc Review by BOB
Quality
Value
Overall
Using four of these on my quad.I have no problems with any of the 4 I purchased.I'm using the emax 2822 motors with 8" props and I get no overheating and smooth throttle response.These esc 's are excellent (Posted on 9/5/2014)
Great bang for the buck! Review by mark
Quality
Value
Overall
Bought these for a homemade tri-copter project. 11 flights so far and loving it. Another great product from Value Hobby. Keep up the good work. Perfect size, weight and nice smooth performance. (Posted on 7/14/2014)
Responsive Review by Don
Overall
Quality
Value
I didn't think that the simonK firmware would make that much of a difference. But I bought 10 of them for a hex and a quad. These are a great deal and overall a great value. I put these and the hobbywing in my quads and flew one after another. The simonK quad is extremely responsive to commands. Where the hobbywing are a little smoother. And a bit slower. Both are a great deal. SOMETHING you should know and understand. These do not have a low voltage cutoff and you can puff a battery. I would highly recommend a voltage monitor and use extreme caution when cconnected to the battery. I like these! (Posted on 6/23/2014)
good buy Review by Dale
Quality
Value
Overall
I have these on my HT-FPV & are smooth. Works well with my MWC Flip 1.5. They run cool. Great price. (Posted on 4/11/2014)
Simon K esc Review by robert
Value
Overall
Quality
These Escs are great for multi copters . I have three on a Tri copter and they perform real well . Very responceive . Great value (Posted on 4/3/2014)

Add Your Review

You must have purchased this product through Value Hobby to submit a review.

GForce 30A Brushless Multi-Rotor ESC with SimonK Firmware (2-4S LiPOs)

USD

$6.00

5

6