You have no items in your shopping cart.

Subtotal: $0.00
Move your mouse over image or click to enlarge

Emax CF2812 Brushless Outrunner Motor

Value
Overall
Quality
8 Review(s)

SKU: EMX-MT-0166

Availability: Out of stock

$7.45
Quality
5 star :
63%
( 5 )
4 star :
38%
( 3 )
Overall
5 star :
88%
( 7 )
4 star :
13%
( 1 )
Value
5 star :
100%
( 8 )
Total : 8 Reviews
Sort by:

8 Item(s)

per page

Value
Overall
Quality
Kel
Great little motor.(Posted on March 19, 2014)
This is a great little motor. Underpowered for an 800mm warbird, but still a great motor.

Do you find this review helpful?  Yes No

Value
Overall
Quality
Cody
Great motor!(Posted on March 4, 2014)
Very versatile. Great for slow flyers or fast zoomers! For slow flyers use a 9X4.7 and for fast flyers use a 7X5APC. Great price too.

Do you find this review helpful?  Yes No

Quality
Value
Overall
Phil
Awesome little motor(Posted on March 20, 2013)
These are tough little motors! and pretty fast too! I use them on my flying wings made out of EPP foam weighing around 16 to 18oz's. the only gripe I have with them is the little grup screws in mount holding motor bearing tube will come loose after a few flights. easy fix with some blue thread locker. good value! you can buy alot of them at this price!

Do you find this review helpful?  Yes No

Quality
Value
Overall
Rosario
all around great little motor(Posted on January 8, 2013)
Just love this motor use it in almost all of my planes,(Dapron EPP wings) scratch built it seems to run for ever only one draw back is if you have a hard nose in or crash and the esc gets pulled loose the windings can pull away from the can and break and the shaft is kinda soft you can get replacements the good news is that I (you) can rewind these over and over and they work just as good or better than new so for the money get a few and give them a try also get the 2822 as I use those as well.

Do you find this review helpful?  Yes No

Quality
Value
Overall
Team Barger
good buy(Posted on November 17, 2012)
These are great little motors for the money and can take a pretty good beating. It works great for the mini Gremlin with a 7x5 prop . I really get some long flight times with a 800 mah battery.

Do you find this review helpful?  Yes No

Quality
Value
Overall
Trent
Great motor for a small price(Posted on October 26, 2012)
This is a fantastic little motor - perfect for 34" combat wings (Crash Test Hobby's "Assassin")
Rewind them with 9 turns of 24 awg MicroDan motor wire and get 300 to 347 watts output with a 7x6 prop @ 31 amps with a 3s 1300 mAh battery.
Stock they are around 200 watts at 20 amps with the 7x6 prop. What more could you want from a motor costing under $10.00??

Do you find this review helpful?  Yes No

Quality
Value
Overall
Ron in Las Vegas, NV
Great motor for a mini Popwing!(Posted on October 6, 2012)
I bought this motor to replace a motor that burned up on my Techone Mini Popwing. I was looking for something that would work well with a 25 amp ESC, 6x4 prop and a 3 cell 1000mah lipo and boy did I get what I was looking for. This motor is excellent on my wing! Although it's not a screamer the speed is decent compaired to the HXT motor I used before but the bonus was unlimited vertical. I had my wing so high that I couldn't see it anymore and it took about 3-4 seconds after cutting the throttle for it to come down enough that I could see it. I get 8-10 minutes of flight time on a 1000mah 3 cell 40c lipo and the motor comes down slightly warm. The ESC is cool to the touch. I will definately be buying a few more of these motors.

Do you find this review helpful?  Yes No

Quality
Value
Overall
Lewis Slawny
Hard to beat for the price!(Posted on September 9, 2012)
Theese little motors have been a blast to use! Low power consumption, Low cost, These make great combat plane plane motors, If you like working with depron or other foams, or even smaller park flyer arfs you will get hooked on these in no time. I have two of these one is on a 13.5 oz. pusher jet with a 6-4 prop and at wide open for the entire flight the 1000 mah batery and motor are barely warm. Oh and by the way that set up is probably a 35 to 50 MPH plane that keeps up with most of the nitro planes at the field. I have really been hard on this little motor and after 100 plus flights still works like new. you do the math.

Do you find this review helpful?  Yes No

Login to submit a review


You must have purchased this product through Value Hobby to submit a review.

Emax CF2812 Brushless Outrunner Motor

USD

$7.45

4.85

8