You have no items in your shopping cart.
Subtotal: $0.00
Call Value Hobby: (630) 948 0947
You have no items in your shopping cart.
Quality | ||
---|---|---|
5 star : | ( 10 ) | |
4 star : | ( 5 ) |
Overall | ||
---|---|---|
5 star : | ( 13 ) | |
4 star : | ( 2 ) |
Value | ||
---|---|---|
5 star : | ( 15 ) |
|
great 3D balsa plane(Posted on January 27, 2016) When I decided to try 3D flying; I've bought bunch of 3D foamies. They were hit and misses. This balsa 3D plane was easy to build and flies superb. It has become my favorite, enough said. |
|
Overall a great 3D plane. (Posted on September 5, 2015) This is the best flying plane I've ever had in 35 years of RC flying. It's so easy to learn 3D on and can take a beating. It's the perfect size to fit in your car and still be easy to see when in the air. If and when they are back in stock, I would buy 3 or 4 of them so you will always have one to fly. It's the kind of plane you never get tired of flying. Very pilot should have one in the hanger. |
|
Fantastic aircraft.(Posted on June 1, 2014) Have been putting this plane to the test over the past few months and it is definitely some of the most fun I've had with a plane out of my 10+ years of flying. Its set up with the G-force E400 motor, 1300 mah battery and emax servos. A bit too tail heavy with this setup but added some weight to the front and all is good. It is a very smooth and agile flier. Plenty of power at hand, it can pull straight up out of a hover. The build process was excellent. Took a couple of nights to put it together, but could really be built in a night if youre really eager. I have put it through many stressful situations to test its durability and it has held up well. I did snap the landing gear off, but this was due to pilot error and landing in tall grass to fast. The bright side to this is that the gear snapping caused no damage to the frame of the plane (and I actually prefer to fly it without the gear). The only negative thing I can comment on is that the control horns are a bit weak and the pushrod connectors that come with the kit are junk. However, just take care with control horns and pick up some beefier pushrod connectors and you'll be good to go. Bottom line: Do not hesitate to buy and put one of these together. |
|
excellent flying, well built airplane(Posted on January 20, 2014) I had some skepticism of this airplane mostly due to the low cost and "you get what you pay for" type attitude, but in this case that saying does not apply. This airplane flies great, builds easy, and is well built. I could not believe the low price. I crashed my Eflite edge profile balsa and needed a replacement. This plane has all the electronics from the Eflite; suppo 2217-9 motor, 1500mah nanotech, and it is slightly tail heavy. The punch out of hover is decent, not excellent. I will be upgrading the motor soon. I hope this plane is still around when I need a replacement because I found my new favorite. Oh and the landing gear will work well if you are landing on asphalt/pavement, but because I am flying in my backyard I went to larger wheels and it has held up fine. |
|
A must buy for a sihouette aerobatic plane.(Posted on November 14, 2013) This is a beautiful flying plane. It will do slow, or fast to suit your needs at the moment. Aerobatics are easy. Makes anyone look accomplished. My only gripe is that I needed to put some supports on the landing gear. I used fishing line run from the gear to the nose to keep the gear from flopping backwards. I also strung some line across the gear to keep it from flexing too much. This is the plane that I fly the most. |
|
Awsome Plane(Posted on May 4, 2013) I love this plane. I believe its the Best flying plane out their in its size. Definitely the best flying plane Ive come across in this price range. Getting me another one. Set up with a ST .10 the balance and power are perfect. |
|
I love this plane(Posted on May 1, 2013) It flies great. The hardware needed to be upgraded and the instructions are vague, but totally worth buying, especially for the price. Buy it and you will love it too. |
|
good plane for cheap(Posted on April 26, 2013) Best budget plane I have. My only complaints is the hardware and instructions. A trip to my LHS and I was out flying. It is light weight and has plenty of power with the recommended motor, just reinforce the motor mount. I get over 10 minutes of flight time with a 3s 1500 mah lipo. Even flies well in wind. Get this plane, you will love it. |
|
Awesome!!!!(Posted on April 19, 2013) What an awesome plane!!!!!!!! I sure hope that Alex will continue to carry these as it is one of my most fav. 3D Slabs of all time! Using the Bro rec. ST .10 it has all the power I want. If you have been wondering about trying a Sabre don't wait any longer. I couldn't be happier! Thanks! |
|
back to further my review of the sabre35(Posted on February 12, 2013) i'm back to continue my review of the sabre35, man what a great plane, i put the super tigre .10 brushless motor in it. really pleased with this setup, the plane is more rugged than i expected, i've dumped it a few times with very minimal damage, nothing that would deadline the plane, in fact i'm so happy with it, i just ordered a back up kit |
金属肛塞 红色钻底 大号
USD
$69.50
4.85
15