Arrived in great shape and fast as usual from ValueHobby. Covering was in great shape and no sags anywhere. Instructions are good a basic guide only. This is why I would NOT recommend this to anybody without a little building experience. The stock set up for pushrods did not work for me as it would bind and strain the servos. I had to replace with better quality components. The control horns and clevis were of very poor quality and were also replaced as well as the wing hold down bolts and corresponding blind nuts . Went together fairly well despite needed mods.
Mine is powered by Value Hobby 46 with Castle Creations 60Amp ESC and 4S 4000 mah 30-40C battery and APC 14X8 prop. Get 6-8 minutes flight times with throttle management. Only needed 3 clicks of up trim on maiden flight yesterday to fly hands off. The CG listed in the manual works OK, but this airplane has a small CG envelope to be either nose or tail heavy. Used velcro and straps to fine tune CG by moving battery.