You have no items in your shopping cart.
Subtotal: $0.00
Details
Specifications:
- Wingspan: 31.9 in (810 mm)
- Length: 740 mm (29.1 inch)
- Wing Area: 233 in sq(15.0 dm sq)
- Flying Weight: 600 g (21.2 oz)
- 2350KV brushless outrunner motor.
- 30A ESC
- 9g servos x 2
- 6 x 3 pusher prop x 2
- At least 4-CH TX/RX (delta-mix)
- 3S 2200mah 25C LiPO
- Battery Charger
Included:
Still Required:
Additional Information
| SKU | ZET-PL-2835 |
|---|---|
| Length(in) | 29.1 |
| Material | EPO |
| Type | Aerobatic |
| Wingspan(in) | 31.9 |
| Size Class | .15-Size |
Customer Reviews
- Easy to build, Fun to Fly, Lots of potential Review by DANNY
-
Let me start by stating that Value Hobby has great customer support. Any issues are handled diligently.Value Overall Quality
This plane is another fun and fast by Zeta. The build does take some time to build [gluing is moderate], about 2 hours+. Be sure to follow the instructions and set the aileron/elevon control level as indicated as this is set to keep the plane flying level. Once you acquire the proper center of gravity the plane can be flown fast and will even glide down with no power. I've only tried with the GForce 3S 2200mah 20c Lipo from Valuehobby which worked fine, but will need to get some 30-60c discharge lipos! I do not think this will fly with a 2S so keep with the recommendations.
Lots of room for potential upgrades with motor, prop and even an EDF swap.
Great buy and awesome customer support!
Danny D (Posted on 1/9/2014) - Great little plane and fastttttttt Review by James
-
When this thing leaves your hand its gone, this pusher prop is faster than my EDF jets and will stand side ways and turn on a dime. Its very easy to hand launch just make sure you set your aileron control as it says in the manual, I set my throw rates to 80% and its flies smooth as glass. Looks amazing in the air. Looking to add the Blaze for next plane. (Posted on 9/24/2013)Value Overall Quality
Manuals
