VH250 Carbon Fiber FPV Racing Quadcopter ARF

Product Rating:

Product Review (submitted on November 15, 2016):

Just as I had finished building a 250 from parts, I found this ready to fly quad costing less than the one I built. I figured if nothing else I could use it for parts. I used librepilot to sync my receiver to the flight controller making sure all the controls acted properly ,I had to reverse 2. Now I am a crappy quad pilot, but after a while I can get a full battery flight. Someone mentioned the flight controller was incorrectly installed but it is possible in the program to easily turn the FC 90 degrees so the mini usb can be easily accessed. My problem is that motor #4 has always had bearing noise and I can't find a replacement motor that I know will match (FPVpower 2204 2300kv) IF I can't replace it , buying 4 matching motors is not cost effective. So now I'm back to parts. What I didn't like from the getgo was the lack of a power distribution board just power leads soldered together, reversed threads on two of the motors instead of lock nuts. Sometimes it flies fine then next time it can't get off the ground ,but that maybe that's the motor. I learned a lot from this quad on what to expect and that the one I built flies just as well.