You have no items in your shopping cart.
Details
Specifications:
- Wingspan: 55.5 in (1410mm)
- Length: 40.6 in (1030mm)
- Weight: 2.4 lb (1100g)
- Motor: 630KV Brushless Outrunner Motor (installed)
- Speed Controller: 30A ESC (T connector)(installed)
- Prop: 11 x 7 Prop (included)
- Servo: 9g Micro Servo x 4 (included)
Still required (not included):
- Your Own TX and RX
- 3S 2200mAh LiPO, 20C or above
Additional Information
SKU | TFT-PL-2859 |
---|---|
Length(in) | 40.6 |
Material | EPO |
Type | Trainer/Beginner |
Wingspan(in) | 55.5 |
Size Class | .40-Size |
Customer Reviews
- mainly a build review, haven't flown it yet Review by chip
-
Quality Value Overall
build review: i put the landing gear together first and noticed the main gear wheels were not round, so when you roll the plane it looks like it's limping (ordering new dave brown wheels)
when i tried to snap the rudder and elevator clevis' together they wouldn't lock. i had to drill out the hole in order for them to work. i added plastic tubing to all the clevis' to keep them locked.
the area that you put your receiver in is rather tight if you have large hands which i do. i used a lemon receiver/stabilizer and it was difficult to get on the center line and fastened down securely.
the wing went together with some difficulty, you need to make sure that you fasten the wing into the fuselage as you are gluing the two wing halves together or the front pins on the wings won't line up with the holes in the fuselage.
the vinyl decals don't fit well so there are lots of air bubbles and wrinkles, it took me a little over an hour to get most of them worked out. there are some that well never be worked out like at the tail and where the wing tips turn down.
i read reviews and watched build videos on the airplane before i ordered it. i can't believe they didn't run into the same problems i did. maybe i just got one that was made on friday, if that makes any difference in china.
i'm almost afraid to fly the thing i had so much trouble getting it together. but the weather here is windy and wet and will be for the next week so it may be awhile.
please pardon my spelling. (Posted on 2/21/2018) - Great plane Review by John
-
Overall Quality Value - a beauty in the air! Review by Roadking
-
Overall Quality Value
1st the pluses...
A beauty! Easy to put together. Flies docile.
And everything worked out of the box!
Minuses....screws are cheap!! Metal too soft!!! Go to lowes or hardware store and replace them!!!
And, switch to an AC prop. Much stiffer! Get an 11 x 6 or 11 x 7. Included prop has too much flex.
If you fly off of grass runway, ditch the wheel pants!!! They get caught up in grass. And, replace the included wheels with ones that are at least 2 1/2 inch diameter. You cant hand launch this plane, your hand needs to be close to where the cg of the wing is. On this model, the cabin/fuse is too wide. You would have to grab it towards tail which could result in a nose dive towards ground.
All in all, nice model to fly. I flew it off grass and it was a little tuff to get airborne...had to let it run a little for take off.
(Posted on 11/11/2014) - Nice plane Review by Fred
-
Quality Value Overall
Overall, this is a great first plane. My daughter and I had a blast with is.
(Posted on 9/8/2014) - A-1 Review by Robert
-
Quality Value Overall - Flight review, Have 10 flights on plane Review by Melvin Decker
-
Overall Quality Value - Great flyer Review by Scott
-
Overall Quality Value - Great flying aircraft, outstanding customer service. Review by Mel Decker
-
Overall Quality Value
I'm SUPER IMPRESSED with the customer service I got when I needed spare parts. They resolved my issue in a timely and professional manner. I have dealt with many companies, and own many planes, VALUE HOBBY has OUTSTANDING CUSTOMER SERVICE, Thank u Value Hobby. (Posted on 10/23/2013) - Very Nice Plane Review by Bruce
-
Value Overall Quality
Manuals