This motor does not have label sticker on it.

This 480-size brushless outrunner motor provides quiet, efficient power from a small and light-weight package. It's ideal for 3D park flyers 30-40oz and scale park flyers upto 3.5lbs, using 3S (11.1V) 2200 - 3000mAh LiPO batteries. It is capable of producing up to 4 lb of thrust and generate about 350W of power.

Specifications:

• KV: 1100
• Motor Diameter : 37mm
• Weight: 3.5oz (100g) for motor only, not including mounting accessories
• Shaft Diameter: 4mm
• Battery: 3S LiPO
• Max Load: 38A
• Max Efficiency: 28A

Recommended Setup:

• 40A brushless ESC 
• 3S LiPo and at least 2000-3000mAh
• Prop Selection: Remember to always use props designed for electric motors, nitro props are heavier and might overload the motor.
• With 3S LiPO: 10x6, 11x5

Motor Dimensions: (in millimeter)

Included Hardware:

• 1x Collet-type Prop Adapter
• 1x Motor Mount
• 1x Spinner
• 3x Gold Bullet Connectors
• 4x Screws
• 2x Black Shrink Tube
• 2x Red Shrink Tube
• 2x Blue Shrink Tube

Recommended Setup:

• 40A  brushless motor ESC
• 3S LiPO and at least 2200mAh.
• Prop Selection: Remember to always use props designed for electric motors, nitro props are heavier and might overload the motor.
  With 3S LiPO: 11x5.5E
• The above prop selections are recommended for sports flying at open throttle. You may try using larger props if you do not fly at constant open throttle.